Leaking washer jet
December 20, 2012 - 22:50
Hi all,
After today's very heavy rain I've discovered a drip in the passenger footwell, discovering the cause required some acrobatics but worthwhile!
It turns out to be the passenger side windscreen washer jet.
Can anyone tell me how it's fixed in place? Presumably it's just pushed in and glued but as the visibility and access are so poor I thought it best to check.
Thanks,
Craig
December 24, 2012 - 10:20
#1
Hi Craig,
From memory I used sikaflex. It seems I used sikaflex fro everything!!
Juls
December 25, 2012 - 21:33
#2
Thanks Juls.
The washer jets were held in place by a small plastic clip and some sealant, the latter had perished. Pushing from underneath the clip was easily overcome and washer jet removed. Both now as good as new.
Thanks!